BMW’s are synonymous with a smooth driving experience. In order to maintain that you want to be sure to keep your vehicle in top working order. Your BMW 3 series service schedule is a great starting point to regular maintenance.
If your suspension and steering systems are off, then the driving experience you have come to expect from your BMW will be negatively impacted. Maintaining all the component parts of your vehicle will keep your car operating as beautifully as it did the day you bought it.
Ball Joint Failures
The ball joint is an important part of your suspension system, if it fails it can cause big problems. You want to be on the lookout for a few common symptoms of ball joint failure and bring your car in for service as soon as you notice them. As with most car issues, the longer you leave them unchecked, the more you risk spending on a repair.
Strange Noises: If the ball joint is worn out and comes loose in its socket, it can begin to rattle around and cause a strange clunking noise to come from the front end of your car. It will be more noticeable if you are driving on uneven ground, like bumpy roads or over speed bumps. The louder it gets the worse the problem generally is. If you leave it for too long then the ball joint could completely break.
Vibrations: Similar to the last sign, a loose ball joint might make your car vibrate while driving. It can sometimes be felt in the steering wheel.
Steering Wheel Pulling: Speaking of steering, ball joint issues can impact your wheel’s ability to stay straight. You might notice that your steering wheel is drifting to either side.
Common Causes Of Ball Joint Failure
Like any car issue, ball joint failures are usually due to normal wear and tear. Your vehicle was made to be used and is durable enough for that. But, you need to have it regularly serviced in order to maintain the level of performance that BMW’s are famous for. Ball joints are a very small part that can cause you very big problems.
Normal wear and tear is the number one cause of ball joint failure. The loss of grease around the ball joint can prevent it from rotating properly and maintaining function. If the grease dries out or gets mixed with dirt, the steel ball joint can deteriorate faster than normal. A broken or cracked seal can cause oil to leak, or dirt to get into your car. If that dirt and oil mix with the grease covering your ball joint then the part can fail.
The Best Shop to Get Your BMW 3 Series Serviced
With almost 10 years of experience providing the Louisville, KY area with top quality service, the Turning Wrenches mechanics are your answer to ball joint failure issues in your BMW 3 series. By focusing on European Brands, including BMW, we are able to provide our clients with specialized high quality service you expect from a dealership. We have a passion for German engineering and keep up to date on all the latest technology and tools to get your job done in the best way possible.
Your BMW 3 series is a work of art and an incredible driving machine, you should not trust its care to just any mechanic. Our trained mechanics will work with every client to come up with a service plan together that best benefits you and your car goals.
You can’t trust servicing your BMW to just anybody, but you might want an alternative to dealership servicing. If you are looking for a shop that has the experience and knowledge of a dealership but without the long wait times and hike in prices, then look no further. The customer service at Turning Wrenches matches our excellent quality workmanship. We understand that luxury and top performance are expected from your BMW and believe it should be expected of service as well. Contact us for an appointment today and be sure that your car is being treated with the utmost care by the top mechanics in our area. Call us today!
We understand that it’s a bit of a task trying to figure out how to fix your engine light issues. This article is here to help you solve that. The check engine light is usually a yellow or orange outline of an engine displaying either “check” or “service Engine.”
When you turn on the engine, it should come on for a few seconds and go off after the routine check of the engine components have been completed. If it remains on, then there is a problem.
If your check engine light flashes or blinks instead of staying on, it means you have a major problem that must be addressed right away. It is a dreaded warning for many drivers and an indication that the onboard diagnostics system has identified a failure in the vehicle’s emissions, ignition, fuel, or exhaust systems.
Common Causes of the Check Engine Light
Failing Spark Plug: The spark plugs supply the spark that ignites the air/fuel mixture, needed to power the engine. Over time, spark plugs wear out or fail. When it fails, it causes the mechanical system to malfunction creating engine difficulties. Consequently, the check engine light illuminates to notify the driver of the development. This is a more significant problem, and you should contact our professionals as soon as possible to schedule service.
Loose Gas Tank Cap: When your gas tank cap is not fastened correctly, it can trigger the check engine light. This is one of the most specific causes of a check engine light.
Faulty Catalytic Converter: The work of the catalytic converter is to convert carbon monoxide into carbon dioxide. Once the catalytic converter is broken, it can’t perform its function. This hitch can cause the check engine light to come on.
Oxygen Sensor Problems: The engine’s oxygen sensor regulates the mixture of gasoline and air produced by your Audi’s engine. When this sensor fails to do this, your car might start burning up fuel more quickly than usual.
How to Deal with a Faulty Check Engine Light
When you have your check engine light illuminated on your vehicle dashboard, it is vital that you have it checked by a certified Audi mechanic:
When your check engine light comes up, try tightening your gas cap: This can be helpful if your warning light is on because gasoline vapors are escaping from a loose gas cap. We recommend trying this first, as it’s an easy fix if its the cause of the warning.
Reduce speed and load: Decrease your speed and try to reduce the demands on the engine if the check engine light is blinking or if you detect any significant performance difficulties, such as a lack of power. Limiting long-distance traveling, for example. Your Audi should be evaluated as soon as possible to reduce the chances of further costly damage.
Use built-in diagnostic services: Most recent Audi models include built-in remote diagnostics to report on fault codes and make a service appointment. This inbuilt feature is recommendable as many automakers now offer remote diagnostics and the option to arrange a service appointment.
Bring your car to our mechanics: Our mechanics are educated and certified in fixing and maintaining cars. So, entrusting your vehicle into the hands of our professionals means getting the best care you need. We are prepared with tools and technology to inspect, diagnose, and make the necessary repairs to fix the issue.
Turning Wrenches European Auto Repair
Preserving the superior performance European vehicles have to offer for years means a commitment to service and maintenance. At Turning Wrenches, we help drivers throughout the Louisville, KY area take better care of their European vehicles.
At Turning wrenches, we are committed to your satisfaction. We employ the latest tools and equipment to deliver the most quality service. We also offer a complete initial inspection so you can be fully aware of all that your car needs. Even better, we offer a 3 year/36,000 miles warranty on our repairs. Please call or visit our shop today to schedule your next appointment. We look forward to earning your repeat business for all your future Audi car care needs.